UV-SAFETY: Tubes BACK TO PRODUCT SELECTION UV-Block Safety Tube / Shrinkwrap UV Safety Tube - coated fluorescent tube / Shrinkwrap Fluorescent tube shrinkwrap coated incorporating our special Ultra Violet absorbing filter. It is the "one-way" counterpart to UV Safety-Sleeves. (+ Safety effect) There is a choice of three different types depending on safety needed: UV Shrinkwrap Tube / Type G10 cut off point at 520 nanometres - designed for locations such as clean rooms, plate making and areas where films or materials are sensitive to ultra-violet radiation, circuit board and semi-conductor manufacturing plants. UV Shrinkwrap Tube / Type LY5 cut off point at 470 nanometres - designed for higher UV-sensitive materials and locations but giving utmost brightness. UV-KLAR Shrinkwrap Tube / Typ C20 - klar cut off point at 400 nanometres - designed for use in museums, archives, galleries and any other places where constant exposure to unprotected fluorescent lighting will damage items on display. T5 (16 mm tube) (Product code to be preceded by G10 / LY5 / C20) Product Code Length UVST T5   6 Watt 230 mm UVST T5   8 Watt 300 mm UVST T5 13 Watt 525 mm UVST T5 14 Watt 549 mm UVST T5 21 Watt 849 mm UVST T5 28 Watt 1149 mm UVST T5 35 Watt 1449 mm 1 carton = 40 tubes T8 (26 mm tube) (Product code to be preceded by G10 / LY5 / C20) Product Code Length UVST T8 15 Watt 450 mm UVST T8 18 Watt 600 mm UVST T8 30 Watt 900 mm UVST T8 36 Watt 1200 mm UVST T8 58 Watt 1500 mm UVST T8 70 Watt 1800 mm Special sizes on request / 1 carton = 25 tubes T12 (38 mm tube) (Product code to be preceded by G10 / LY5 / C20) Product Code Length UVST T12 20 Watt 600 mm UVST T12 40 Watt 1200 mm UVST T12 65 Watt 1500 mm UVST T12 75 Watt 1800 mm EncapSulite UV-Filter G10 / LY5 / C10 also available as in rolls. size: 10 m x 1.20 m G10 filter roll Not recommended for use in air/water tight switch start fittings and for FQ / HO lamps BACK TO TOP BACK TO PRODUCT SELECTION