MULTI-TUBES: Lite-Bar IP65 BACK TO PRODUCT SELECTION Lite-Bar IP65 T5 LiteStick - waterproof - Complete Unit with incorporated Electronics The all new LITE-BAR can be fixed to the wall or ceiling or simply be free standing. Used for both interior and exterior applications the Lite-Bar houses a T5 lamp with either a switched, 1-10v or DALI dimmable ballast incorporated at one end. The T5 lamp is mounted on a pre-coated steel spine which allows unhindered light output one side and two thirds of the edges, with a design of illuminated square holes on the opposite side. A choice of lamp colour is available, with a cost option of having the square holes in a different colour to that of the lamp. Numbers or text can be incorporated within the ballast section of the Lite-Bar, POA. Mounting clips are included. The Lite-Bar is supplied without a cable and plug set which is available and fitted as a cost option. Dimensions: Width 36 mm Height 26 mm Length from 970 mm/14W to 1870 mm/35W non dimmable Lite Bar: Product Code Illuminated Length Overall Length LB/14Watt/ T5 570 mm 970 mm LB/21Watt/ T5 870 mm 1270 mm LB/28Watt/ T5 1170 mm 1570 mm LB/35Watt/ T5 1470 mm 1870 mm 1-10V or DALI dimmable Lite Bar: Product Code Illuminated Length Overall Length LB/14Watt/ T5 570 mm 970 mm LB/21Watt/ T5 870 mm 1270 mm LB/28Watt/ T5 1170 mm 1570 mm LB/35Watt/ T5 1470 mm 1870 mm Not recommended for permanent immersion BACK TO TOP BACK TO PRODUCT SELECTION